Wednesday, April 26, 2006

ML70 Debug Cable

HBM delivers for Soft PLC ML70/ML70B a debug Cable. You can build such a cable for your own, when you cut off one plug of a ethernet patch cable and connect the open lines with a 9-pin Sub-D connector as shown in the picture... Posted by Picasa

Thursday, April 20, 2006

Higher Sample Rates with ML801B

Higher Sample rates with ML801B for MGCplus: Use MGCplus Assistant, mark ML801B channel, then right click: Choose advanced settings and change subchannel count as described. With 4 channels you can have sample rates up to 4.8kHz, with 2 subchannels you can even sample with 9600Hz. All measurements are taken synchoneous ! Posted by Picasa

Tuesday, April 18, 2006

MGCplus, catman and SciLab...

The HBM amplifier system MGCplus is used worldwide in different applications. Measurement data can be acquired on PC cards (stand alone usage) or with the HBM software catman.
For professional post process analysis this data can be imported directly into SciLab (Free MatLab Clone Import filter are available in the contribution area.
Catman and MGC data can be used easily in SciLab. Data format and source codes are available. Programmers are invited to optimize everything for individual applications. Posted by Picasa

Thursday, April 13, 2006

Acquiring GPS Data with MGCplus: No problem with the soft PLC ML70. Ready made CODESYS programs - free of charge - are available for different tasks in different applications. Posted by Picasa

AP836i: Poti & Voltages with TEDS for MGC+

Measures Potentiometer and voltages: The new AP836i for MGCplus. Transducer recognition (TEDS) based upon IEEE1451.4 is supported. To be used with ML801B in MGCplus systems Posted by Picasa

Voltage and Current Measurement with MGCplus

The new connection board AP402i for MGCplus. Measurement of voltages (+/-10V, +/-60V) and currents (+/-20mA) Posted by Picasa

Monday, April 03, 2006

Contact Information to HBM


in order to get fast contact to HBM, here some internet adresses:

The 2nd adress is the direct link to the complete documentation. In my eyes, this should be the official startpage, because the page gives the best overview over products and their technical documentation.

Best Regards